F 150 4WD V8-4.6L VIN 8 (2010)
4. Remove the rear latch bolt and outboard seat riser.
-
To install, tighten to 24 Nm (18 lb-ft).
5. Remove the screw and latch bolt cover.
6. Remove the front latch bolt and cushion latch.
-
To install, tighten to 32 Nm (24 lb-ft).
7. To install, reverse the removal procedure.
Seat - Exploded View, Rear, Crew Cab
Seat - Exploded View, Rear, Crew Cab
Seat Backrest - 40 Percent
