F 150 4WD V8-4.6L VIN 8 (2010)
Tailgate Release Handle: Service and Repair
Tailgate Release Handle
Tailgate Release Handle
Removal and Installation
1. If equipped, remove the tailgate step assist handle. For additional information, refer to Truck Bed.
2. Remove the bolts and the tailgate access panel (7 bolts for flareside bed, 8 for without step tailgate, or 13 with step tailgate).
-
To install, tighten to 5 Nm (44 lb-in).
3. Remove the 2 tailgate release handle nuts.
-
To install, tighten to 9 Nm (80 lb-in).
4. Remove the tailgate release handle.
5. To install, reverse the removal procedure.