Parking Brake Cable Replacement for 2010 Ford F-150 4WD V8-46L VIN 8
Parking Brake (View 3 of 3)
Parking Brake Cable - Rear, LH
Parking Brake Cable - Rear, LH
Removal and Installation
1. Release the parking brake cable tension. For additional information, refer to Parking Brake Cable Tension Release See: Procedures.
2. Disconnect the LH cable from the RH cable equalizer.
3. Disconnect the front of the LH rear cable conduit from the frame bracket.
4. Disconnect the LH cable from the double cable clamp.
5. Disconnect the LH rear parking brake cable from the rear parking brake levers and remove the cable from the vehicle.
6. To install, reverse the removal procedure.
-
Inspect the parking brake system for correct operation.
Parking Brake Cable - Rear, RH