F 150 4WD V8-4.6L VIN 8 (2010)
10. NOTE: Lower air deflector pushpins shown, RH and LH pushpin retainers similar.
Connect the 3 RH and 2 LH air deflector-to-condenser pushpin retainers and the 3 lower air deflector-to-bumper pushpin retainers.
11. Using new gasket seals and O-ring seals, connect the A/C condenser fittings and install the bolt and nut.
-
Tighten to 15 Nm (133 lb-in).
12. Install the coolant expansion tank/lower ACL half and the 2 bolts.
-
Tighten to 15 Nm (133 lb-in).
13. Install the ACL element.
14. Install the ACL cover and fasten the clips.
15. Connect the MAF sensor electrical connector.
16. Connect the power steering cooler hose to the power steering cooler and position the clamp.
