F 150 4WD V8-4.6L VIN 8 (2010)
Removal and Installation
1. Disconnect the battery cables. For additional information, refer to Battery.
2. Remove the Air Cleaner (ACL) outlet tube. For additional information, refer to Fuel Delivery and Air Induction.
3. Detach the power steering fluid cooler hose retainer from the cooling fan motor and shroud.
4. Detach the wiring harness retainer from the power steering fluid reservoir stud bolt.
5. Detach the wiring harness retainer from the LH side of the cooling fan motor and shroud.
6. Detach the 2 generator B+ wire retainers from the top of the cooling fan motor and shroud.
7. Detach the wiring harness retainer from the RH side of the cooling fan motor and shroud.
