F 150 4WD V8-4.6L VIN 8 (2010)
11. Install the upper front axle housing mounting bushing bolt.
-
Tighten to 90 Nm (66 lb-ft).
All vehicles
12. Position the crossmember and install the 4 bolts and the 4 nuts.
-
Tighten to 115 Nm (85 lb-ft).
13. If equipped, position the skid plate and install the 4 bolts.
-
Tighten to 25 Nm (18 lb-ft).
14. Fill the engine with clean engine oil.
