F 150 4WD V8-4.6L VIN 8 (2010)
Oil Pick Up/Strainer: Service and Repair
Oil Pump Screen and Pickup Tube
Oil Pump Screen and Pickup Tube
Removal
1. Remove the oil pan. For additional information, refer to Engine Lubrication Components - Exploded View See: Oil Pan/Service and
Repair/Engine Lubrication Components - Exploded View and Oil Pan See: Oil Pan/Service and Repair/Oil Pan.
2. Remove the bolts and the oil pump screen and pickup tube.
Installation
1. NOTICE: Make sure the O-ring seal is in place and not damaged. A missing or damaged O-ring seal can cause foam in the lubrication
system, low oil pressure and severe engine damage.
NOTE: Clean and inspect the mating surfaces and install a new O-ring seal. Lubricate the O-ring seal with clean engine oil prior to installation.
Position the oil pump screen and pickup tube and install the bolts.
1. Tighten the oil pump screen and pickup tube-to-spacer bolt to 25 Nm (18 lb-ft).
2. Tighten the oil pump screen and pickup tube-to-oil pump bolts to 10 Nm (89 lb-in).