F 150 4WD V8-4.6L VIN 8 (2010)
16. Remove the retaining clip from the LH timing chain tensioner.
17. Position the lower end of the RH (outer) timing chain on the crankshaft sprocket, aligning the timing mark on the sprocket with the single colored
(marked) chain link.
18. NOTE: The camshaft phaser and sprocket will be stamped with one of the illustrated timing marks for the RH camshaft.
NOTE: The lower half of the timing chain must be positioned above the tensioner arm dowel.
Position the RH timing chain on the camshaft sprocket. Make sure the camshaft sprocket timing mark is aligned with the colored (marked) chain
link.
19. Position the RH timing chain tensioner arm on the dowel pin and install the RH timing chain tensioner and bolts.
-
Tighten to 25 Nm (18 lb-ft).
