F 150 4WD V8-4.6L VIN 8 (2010)
-
Is the voltage greater than 10 volts?
Yes
GO to J9.
No
For Flareside, GO to J8.
For Styleside (if both lamps on one side are inoperative), GO to J8.
For Styleside (if one lamp is inoperative), REPAIR circuit CLS18 (GY/BN) (LH rear stoplamp) or circuit CLS19 (VT/OG) (RH rear stoplamp) for an
open. TEST the system for normal operation.
-------------------------------------------------
J8 CHECK THE SJB STOPLAMP OUTPUT CIRCUIT FOR AN OPEN
-
Disconnect: SJB C2280d.
-
Measure the resistance between the inoperative rear lamp, harness side and the SJB, harness side; and between the inoperative rear lamp, harness
side and ground as follows: