F 150 4WD V8-4.6L VIN 8 (2010)
Transmission Position Switch/Sensor: Adjustments
4R70E/4R75E
Transmission Range (TR) Sensor Adjustment
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. NOTE: Do not pry on the swivel tube to disconnect the selector lever cable.
Disconnect the selector lever cable.
3. NOTICE: Discard the manual control lever shaft outer nut. Do not reuse. The old nut will not retain the torque specification.
Remove the manual control lever.
1. Remove and discard the manual control lever shaft outer nut.
2. Remove the manual control lever.
4. Loosen the Transmission Range (TR) sensor bolts.
5. NOTE: The manual control lever must be in the NEUTRAL position.
Using the TR Sensor Alignment Gauge, align the TR sensor slots. The tool is designed to fit snugly.
