F 150 4WD V8-4.6L VIN 8 (2010)
5. Disconnect the audio Digital Signal Processing (DSP) module electrical connectors.
6. Remove the 2 rear audio DSP module bolts.
7. NOTE: Access the bolt from underneath the cupholder.
Remove the front audio DSP module bolt.
8. Remove the audio DSP module.
-
Route the audio DSP module forward and towards the passenger side of the vehicle.
9. To install, reverse the removal procedure.
-
Download the configuration information to the audio DSP module. For additional information, refer to PMI in Information Bus. See:
Powertrain Management/Computers and Control Systems/Information Bus/Testing and Inspection/Programming and Relearning
Audio Digital Signal Processing (DSP) Module - Front Captain's Chair
Audio Digital Signal Processing (DSP) Module - Front Captain's Chair