ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Driver Air Bag Module|Page 6653 > < Driver Air Bag Module|Page 6651
Page 2
background image

3. Position the passenger air bag module so that the tabs are oriented as shown.

4. Install the 3 passenger air bag module bolts.

-

Tighten to 8 Nm (71 lb-in).

5. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering  See: Air Bag(s)

Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures.

Driver Air Bag Module|Page 6653 > < Driver Air Bag Module|Page 6651