F 150 4WD V8-4.6L VIN 8 (2010)
2. For SuperCab and SuperCrew, position the center locator tabs into the sheet metal slots.
3. Insert the Safety Canopy(R) module canister hook into the sheet metal slot.
4. Connect the Safety Canopy(R) module electrical connector.
5. NOTE: RH shown, LH similar.
For SuperCab, install the 10 Safety Canopy(R) module bolts and A-pillar tether bolt.
-
Tighten in the sequence shown to 6 Nm (53 lb-in).
6. NOTE: RH shown, LH similar.
For SuperCrew, install the 11 Safety Canopy(R) module bolts and A-pillar tether bolt.
-
Tighten in the sequence shown to 6 Nm (53 lb-in).