F 150 4WD V8-4.6L VIN 8 (2010)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Ring - Rear
Wheel Speed Sensor Ring - Rear
Removal
1. Remove the rear axle shaft. For additional information, refer to Differential Assembly &/or Axle Shaft Assembly.
2. Using a suitable driver, remove the wheel speed sensor ring from the axle shaft and discard the ring.
Installation
1. Using the Axle Bearing/Seal Plate and the Wheel Hub Bearing Cup Installer, press the wheel speed sensor ring on the rear axle shaft to
specification.