F 150 4WD V8-4.6L VIN 8 (2010)
Engine Temperature Sensor: Service and Repair
Cylinder Head Temperature (CHT) Sensor - 4.6L (3V), 5.4L (3V)
NOTE: 5.4L (3V) shown, 4.6L (3V) similar.
Removal and Installation
1. Remove the intake manifold. For additional information, refer to Engine.
2. Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.
3. Remove the CHT.
-
To install, tighten to 10 Nm (89 lb-in).
4. To install, reverse the removal procedure.
-
Apply anti-seize to the threads of the CHT sensor.
