F 150 4WD V8-4.6L VIN 8 (2010)
5. Remove the 4 bolts and the generator bracket.
-
To install, tighten to 10 Nm (89 lb-in).
6. Loosen the 2 generator bolts and position the generator aside to access the electrical connections.
-
To install, tighten to 25 Nm (18 lb-ft).
7. Disconnect the generator electrical connector.
8. Position the generator B+ protective boot aside, remove the generator B+ nut and terminal and remove the generator.
-
To install, tighten to 17 Nm (150 lb-in).
9. To install, reverse the removal procedure.
