F 150 4WD V8-4.6L VIN 8 (2010)
Drain
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Loosen the transmission fluid pan bolts and allow the transmission fluid to drain.
3. After the transmission fluid has drained, remove the transmission fluid pan.
4. Do not remove the transmission fluid filter. It is not necessary to change the transmission fluid filter during a normal maintenance transmission
fluid change.
5. Clean and inspect the transmission fluid pan, transmission fluid pan gasket and magnet.
Refill
1. Position the magnet into the transmission fluid pan.
2. NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage. If not damaged, the transmission fluid pan gasket should be
reused.
Install the transmission fluid pan and transmission fluid pan gasket.
1. Position the transmission fluid pan with the transmission fluid pan gasket in place.
2. Install the bolts.
-
Tighten to 14 Nm (124 lb-in).
