F 150 4WD V8-4.6L VIN 8 (2010)
Shift Cable: Adjustments
Selector Lever Cable Adjustment - Column Shift
Selector Lever Cable Adjustment - Column Shift
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Place the selector lever in the 1st gear position.
4R75E transmission
3. Move the selector lever 2 detents to the (D) position.
4. Remove the heat shield.
5. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.
Remove the selector lever cable from the manual control lever.
6. NOTE: Make sure the cable moves freely.
Unlock the lock tab on the selector lever cable.
7. Place the manual control lever in the (D) position.
-
Place the manual control lever in the 1st gear position.
-
Move the manual control lever 2 detents to the (D) position.