F 150 4WD V8-4.6L VIN 8 (2010)
8. NOTE: Apply pressure to the selector lever cable end while installing it onto the manual control lever and make sure the selector lever and manual
control lever has not moved out of the (D) position.
Install the selector lever cable onto the manual control lever.
-
Listen for the audible click.
-
Pull back on the selector lever cable to make sure it is correctly installed.
9. Lock the selector lever cable lock tab.
10. NOTE: Install a new heat shield if it is loose on the cable.
Install the heat shield.
6R80 transmission
11. Move the selector lever 3 detents to the (D) position.
12. Remove the heat shield.
13. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.
Remove the selector lever cable from the manual control lever.