F 150 4WD V8-4.6L VIN 8 (2010)
5. Remove the LH isolator cap bolt.
6. Remove the Evaporative Emission (EVAP) canister front bracket bolt from the transmission crossmember.
7. Position a suitable high-lift transmission jack under the transmission.
8. Remove the 4 transmission crossmember bolts (2 each side) and remove the transmission crossmember.
9. Remove the 3 transmission insulator and retainer bolts and remove the transmission insulator and retainer.
Four-Wheel Drive (4WD) vehicles
10. If equipped, remove the 4 skid plate bolts and remove the skid plate.
11. Remove the RH exhaust heat shield bolt from the transmission crossmember.