F 150 4WD V8-4.6L VIN 8 (2010)
12. Remove the LH exhaust heat shield bolt from the transmission crossmember.
13. NOTE: Index-mark the driveshaft to maintain initial driveshaft balance for installation.
Remove the front driveshaft.
14. Remove the 2 transmission insulator and retainer nuts.
15. Remove the LH insulator cap bolt.
16. NOTE: Right side shown, left side similar. Transmission crossmember removed for clarity.
Remove the 4 transmission insulator and retainer bolts.
17. Support the transfer case.
