F 150 4WD V8-4.6L VIN 8 (2010)
2. Apply a new, continuous bead of sealant to the differential housing cover as shown.
3. NOTE: The differential housing cover must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If
possible, allow one hour before filling with lubricant to make sure the silicone sealant has correctly cured.
Install the differential housing cover and the 12 differential housing cover bolts.
-
Tighten to 45 Nm (33 lb-ft).
4. Remove the fill plug.
5. NOTE: For non SVT Traction-Lok(R) axles, first fill the axle with 118 ml (4 oz) of friction modifier. No friction modifier is used on SVT axles.
Fill the axle with the specified amount of axle lubricant and install the fill plug.
-
Tighten to 30 Nm (22 lb-ft).
