F 150 4WD V8-4.6L VIN 8 (2010)
4. NOTICE: The driveshaft flange fits tightly on the flange pilot. Never hammer on the driveshaft or any of its components to disconnect the
driveshaft flange from the flange pilot. Pry only in the area shown with a suitable tool to disconnect the driveshaft flange from the flange
pilot or damage to the driveshaft flange can occur.
Using a suitable tool as shown, disconnect the driveshaft flange from the flange pilot and remove the driveshaft.
5. NOTICE: The driveshaft flange fits tightly on the pinion flange pilots. To make sure that the driveshaft flanges seat squarely on the
pinion flange pilots, tighten the driveshaft flange bolts evenly in a cross pattern or damage to the flanges can occur.
NOTE: If new bolts are not available, coat the threads of the original driveshaft flange bolts with threadlock and sealer.
NOTE: Align the index marks made during removal.
To install, reverse the removal procedure.
Driveshaft - Rear, Two-Piece
Driveshaft - Rear, Two-Piece
NOTE: Front slip yoke shown, front fixed flange similar.