F 150 4WD V8-4.6L VIN 8 (2010)
7. Position the inboard boot on the shaft.
8. Position the ball cage on the shaft with the tapered end facing the boot.
9. NOTE: Align the index marks.
Position the inner race on the shaft with the counterbored end facing the boot.
10. Install the snap ring.
11. Lubricate and position the 6 balls.
-
Use CV joint grease or equivalent provided in the boot kit.
12. Fill the inboard CV joint housing with 235 g (8.29 oz) of grease.
-
Use CV joint grease or equivalent provided in the boot kit.