F 150 4WD V8-4.6L VIN 8 (2010)
Transfer Case Actuator: Service and Repair
Transfer Case Shift Motor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Disconnect the harness connector.
3. Remove the coil wire pin from the electrical connector.
1. Remove the inner retainer from the wire connector.
2. Press the release tab and remove the coil wire pin.
4. Remove the transfer case shift motor bracket bolt and the 3 mounting bolts, then remove the transfer case shift motor.
Installation
1. Apply a small bead of silicone sealant to the transfer case shift motor mating surface.