F 150 4WD V8-4.6L VIN 8 (2010)
Seals and Gaskets: Service and Repair
Transfer Case Rear Output Shaft Seal
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the rear driveshaft. For additional information, refer to Drive/Propeller Shafts, Bearings and Joints.
3. Using a suitable seal puller, remove the rear output shaft seal.
Installation
1. Using the Input Shaft Oil Seal Installer, install the rear output shaft seal.
2. Install the rear driveshaft. For additional information, refer to Drive/Propeller Shafts, Bearings and Joints.
