F 150 4WD V8-4.6L VIN 8 (2010)
Wiper Arm: Service and Repair
Wiper Mounting Arm and Pivot Shaft
Wiper Mounting Arm and Pivot Shaft
Removal and Installation
1. Remove the cowl panel grille.
2. Remove the 3 wiper mounting arm and pivot shaft bolts.
-
To tighten, tighten to 8 Nm (71 lb-in).
3. Disconnect the wiper motor electrical connector.
4. Remove the wiper mounting and pivot shaft assembly.
5. To install, reverse the removal procedure.