F 150 4WD V8-4.6L VIN W (2007)
17. Disconnect the heater coolant hose and position aside.
18. Remove the 3 power steering reservoir support bracket bolts and the power steering reservoir support bracket.
19. Disconnect the vacuum hose.
20. Remove the 2 thermostat housing bolts and the thermostat housing and discard the O-ring seal.
21. Remove the thermostat.
22. Remove the 9 intake manifold bolts.
23. Remove the intake manifold and discard the RH and LH intake manifold gaskets.
Installation
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools
cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of old sealant.
