F 150 4WD V8-5.4L Flex Fuel (2008)
Alarm System Transmitter: Service and Repair
PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER
Removal and Installation
1. Remove the steering wheel.
2. Remove the 2 bolts and the lower steering column shroud.
3. NOTE: Vehicles with a steering column shift are shown; the floor console shift is similar.
Remove the ignition lock cylinder cover.
4. Disconnect the passive anti-theft system (PATS) transceiver electrical connector.
5. Remove the screw and the PATS transceiver.
