F 150 4WD V8-5.4L Flex Fuel (2008)
Entertainment System Control Panel: Service and Repair
REAR ENTERTAINMENT MODULE (RETM)
Removal and Installation
NOTE: Programmable module installation (PMI) only needs to be carried out if the DVD player is being replaced.
1. Upload the DVD player configuration to the scan tool.
2. NOTE: Open the display to access the screws.
Remove the 4 screws.
3. Remove the rear entertainment module (RETM).
-
Pull down on the sides of the RETM to disengage the clips from the bracket.
-
Disconnect the electrical connector.
4. To install, reverse the removal procedure.