F 150 4WD V8-5.4L Flex Fuel (2008)
Radio/Stereo: Procedures
Audio Unit Part Number Retrieval
AUDIO UNIT PART NUMBER RETRIEVAL
Audio Systems Without Navigation
NOTE: The terms "audio control module (ACM)" and "audio unit" refer to the same component.
1. Turn the ACM on.
2. Press and hold preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will begin.
3. Before the speaker walk-around test is complete, press preset button 6.
4. NOTE: This step will cause the ACM to auto-scroll through configuration 1, configuration 2, EEPROM number, and ACM part number.
Press the TUNE UP button.
5. NOTE: Step 4 may need to be repeated until the ACM part number can be recorded. Record the ACM part number.
6. Turn the ACM off.
Navigation Audio System
1. Turn the ACM on.
2. Press and hold preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will begin.
3. Before the speaker walk-around test is complete, press END TEST on the display screen.
4. Select SYSTEM INFO from the menu.
5. Record the ACM part number.
6. Turn the ACM off.
Satellite Radio Receiver Electronic Serial Number (ESN) Retrieval
SATELLITE RADIO RECEIVER ELECTRONIC SERIAL NUMBER (ESN) RETRIEVAL
Audio Systems Without Navigation
1. Operate the audio system in satellite radio mode.
2. Press and hold the AUX button and preset button 1, simultaneously.
-
The satellite radio receiver electronic serial number (ESN) will be displayed on the screen.
3. Record the satellite radio receiver ESN.
4. Turn the audio system off.
Audio Systems With Navigation
1. Turn the audio system on.
2. Press the MENU button.
3. Select the SYSTEM INFO tab.
4. NOTE: The satellite radio receiver ESN is shown on the lower left corner of the screen with the text "SR ESN:".
Record the satellite radio receiver ESN.
5. Turn the audio system off.
