F 150 4WD V8-5.4L Flex Fuel (2008)
SuperCrew (Part 2)
Removal and Installation
1. Remove the rear door scuff plate.
2. Remove the safety belt bolt cover.
3. Remove the safety belt bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
4. Remove the C-pillar bolt trim cover.
5. Remove the C-pillar bolt.
6. Remove the rear seat backrest.
7. Remove the pin-type retainer from the C-pillar trim panel.
8. Remove the lower safety belt bolt cover.
9. Remove the lower safety belt bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
10. Pull the safety belt through the C-pillar trim panel.
11. Remove the C-pillar trim panel.
12. To install, reverse the removal procedure.
