F 150 4WD V8-5.4L Flex Fuel (2008)
Disc Brake System - Exploded View (Part 2)
1. Remove the wheel and tire.
2. CAUTION: Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
Remove the 2 brake caliper anchor plate bolts and position the caliper and anchor plate assembly aside.
^
Support the caliper and anchor plate assembly using mechanic's wire.
3. Remove the front brake disc from the wheel hub.
Installation
1. Clean any rust or foreign material from the brake disc and wheel hub.
^
Use parts cleaner to clean the front brake disc and hub surfaces.
2. Apply a thin coat of anti-seize lubricant to the hub flange.
3. Install the brake disc on the wheel hub.
4. Position the brake caliper and anchor plate assembly on the wheel knuckle and install 2 new bolts.
^
Tighten to 200 Nm (148 lb-ft).
5. Install the wheel and tire.
Disc Removal and Installation, Rear
Brake Disc
Material
Removal