F 150 4WD V8-5.4L Flex Fuel (2008)
Parking Brake - Exploded View (Part 2)
Parking Brake Cable-Front
1. Release the parking brake.
2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
3. With an assistant, release the parking brake cable tension by pulling down on the intermediate cable at the cable-to-cable union until the parking
brake control sector rotates to its stop and a 4 mm (0.15 inch) x 15 0 mm (5.9 inch) retainer pin can be inserted.
4. Disconnect the cable at the cable-to-cable union.
5. To reload the tension on the parking brake cable, follow the release procedure in reverse.
^
Inspect the parking brake system for correct operation.
