ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Cylinder Head Assembly > < Procedures|Page 1879
Page 1
background image

Piston Ring: Specifications

Piston Rings 

End gap

Top ..........................................................................................................................................................................  0.15-0.30 mm (0.006-0.012 inch)
Intermediate ........................................................................................................................................................  0.25-0.50 mm (0.0098-0.0197 inch)
Oil control ...........................................................................................................................................................  0.15-0.65 mm (0.0059-0.0256 inch)

Groove width

Top ......................................................................................................................................................................  1.52-1.55 mm (0.0598-0.0610 inch)
Intermediate ........................................................................................................................................................  1.52-1.54 mm (0.0598-0.0606 inch)
Oil control .......................................................................................................................................................  3.030-3.050 mm (0.1193-0.1201 inch)

Ring width - top and intermediate .............................................................................................................................  1.50-1.47 mm (0.0590-0.0578 inch)
Ring-to-groove clearance

Top ..................................................................................................................................................................  0.020-0.080 mm (0.0008-0.0031 inch)
Intermediate ....................................................................................................................................................  0.030-0.070 mm (0.0012-0.0028 inch)

Cylinder Head Assembly > < Procedures|Page 1879