F 150 4WD V8-5.4L Flex Fuel (2008)
RH Valve Cover and Gasket
Removal
1. Recover the refrigerant. For additional information, refer to Heating and Air Conditioning.
2. Remove the PCM and bracket. For additional information, refer to Computers and Control Systems.
3. Remove the RH ignition coils. For additional information, refer to Ignition System.
4. Remove the nut and disconnect the A/C compressor manifold tube.
^
Discard the O-ring seals.
5. Remove the suction accumulator-to-A/C compressor manifold tube stud.
6. Disconnect the evaporator inlet tube fitting.
^
Discard the O-ring seals.
7. Disconnect the quick connect couplings and remove the crankcase ventilation tube. For additional information, refer to Fuel Delivery and Air
Induction.
8. If equipped, disconnect the vacuum tube.
