F 150 4WD V8-5.4L Flex Fuel (2008)
3. NOTE: If not secured within 4 minutes, the sealant must be removed and the sealing area cleaned with silicone gasket remover and metal surface
prep. Follow the directions on the packaging. Allow to dry until there is no sign of wetness, or 4 minutes, whichever is longer. Failure to follow
this procedure can cause future oil leakage.
Apply silicone gasket and sealant at the engine front cover-to-cylinder block sealing surface.
4. Install the oil pan gasket and the oil pan and loosely install the 16 bolts.
5. Tighten the bolts in 3 stages, in the sequence shown.
