F 150 4WD V8-5.4L Flex Fuel (2008)
6.
Liberally apply Motorcraft(R) PTFE Lubricant to the cam tracks. (Figure 2)
7.
Reassemble components in reverse order of removal.
8.
Cycle the control head from panel to defrost mode a few times until the noise is eliminated.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
080809A
2005-2008 F-150,
0.4 Hr.
2006-2008 Mark LT:
Remove Distribution Mode
Door Cam and Replace
Cam Lubricant.
DEALER CODING
CONDITION
BASIC PART NO.
CODE
18471
41
Disclaimer