F 150 4WD V8-5.4L Flex Fuel (2008)
Hose/Line HVAC: Service and Repair
Compressor To Condenser Discharge Line
COMPRESSOR TO CONDENSER DISCHARGE LINE
Removal and Installation
1. Recover the refrigerant.
2. Detach the wire harness from the compressor-to-condenser discharge line.
3. Remove the A/C compressor discharge fitting nut and disconnect the fitting.
-
Discard the O-ring seal and gasket seal.
-
To install, tighten to 15 Nm (11 lb-ft).
