ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Camber and Caster Adjustment|Page 1256 > < Camber and Caster Adjustment|Page 1254
Page 3
background image

NOTE:  Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have at lease
1/2 tank of fuel.

1. Measure the distance between the rear axle jounce stop (Item 2) and the top of the rear axle tube (Item 3) to obtain the rear ride height (Item 1).

Rear Ride Height Measurement, Four Wheel Drive (4WD) vehicles 

NOTE:  Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have at lease
1/2 tank of fuel.

1. Measure the distance between the rear axle jounce stop (Item 2) and the top of the rear spring spacer (Item 3) to obtain the rear ride height (Item

1).

Camber and Caster Adjustment|Page 1256 > < Camber and Caster Adjustment|Page 1254