F 150 4WD V8-5.4L Flex Fuel (2008)
4. Using the special tool, install the fuel pump module locking ring.
5. NOTE:
-
The fuel pump module does not come equipped with a fuel pump module cover from the factory. The fuel pump module cover is only installed
after service to the fuel pump module is performed.
-
Before installing the fuel pump module cover, make sure it fits around all fuel and vapor ports and electrical connectors and allows enough
clearance to install the fuel and vapor tube assembly and the fuel pump module electrical connector.
-
Make sure a minimum of 76 mm (3 in) surface area is properly cleaned of all gas, oil and foreign material before installing the fuel pump
module cover.
Install a fuel pump module cover over the fuel pump module and locking ring.
6. Install the fuel supply and fuel vapor tube assembly onto the fuel tank and connect the fuel supply and fuel vapor tube assembly quick connect
couplings at the fuel pump module.
7. Install the fuel tank.
