F 150 4WD V8-5.4L Flex Fuel (2008)
EVAP Canister Assembly - Disassembly
Exploded View
Removal and Installation
WARNING:
-
When working on or near the evaporative emission (EVAP) system, disconnect the battery ground cable from the battery. The EVAP
system contains fuel vapor and condensed fuel vapor, so an electrical spark may cause a fire or explosion. Failure to follow this
instruction may result in serious personal injury.
-
Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly
flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.
3. NOTE: The evaporative emission (EVAP) canister assembly is located above the spare tire.
Remove the spare tire.
4. Disconnect the fuel vapor tube quick connect coupling.
5. Disconnect the fuel vapor hose.
