F 150 4WD V8-5.4L Flex Fuel (2008)
Fuel Gauge Sender: Service and Repair
Fuel Level Sender
FUEL LEVEL SENDER
Removal
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component.
Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
1. Remove the fuel pump module.
2. NOTE: Note the routing of the fuel level sender wire for installation.
Unwrap the fuel level sender wire from the rest of the fuel pump module wire harness.
3. Remove the heat shrink tube covering the electrical connector.
4. Disconnect the electrical connector.
