F 150 4WD V8-5.4L Flex Fuel (2008)
Shift Indicator: Adjustments
Selector Lever Cable Adjustment
Vehicles equipped with a floor mounted selector lever
1. Place the selector lever in the 1st position toward the rear of the vehicle.
2. Move the selector lever forward 2 detents. This should be the (D) position.
Vehicles equipped with a column mounted selector lever
3. Rotate the selector lever clockwise until it bottoms out (1st gear), then rotate the selector lever counterclockwise 2 detent positions ((D) position).
4. Hang a 1.4 kg (3 lb) weight on the selector lever.
All vehicles
5. With the vehicle in NEUTRAL, position it on a hoist.
Vehicles equipped with a floor mounted selector lever
6. Rotate the cable adjustment lock upward and disconnect the selector lever cable from the manual control lever.
Vehicles equipped with a column mounted selector lever
7. Slide the selector lever cable adjustment lock upwards and remove the cable from the manual control lever.
8. Rotate the manual control lever forward until the travel stops. Then rotate the manual control lever back 2 detents to the (D) position.
Vehicles equipped with a floor mounted selector lever
