F 150 4WD V8-5.4L Flex Fuel (2008)
4.
Retract the collet and pin into the steel tool pilot, protecting the pin. (Figures 13 and 14)
NOTE
PIN TIP DAMAGE OR BENT PINS WILL PREVENT INSERTION INTO THE PORCELAIN.
5.
Insert the completed assembly into the spark plug well and fully engage the pin into the porcelain. (Figure 15)
6.
Spray Motorcraft(R) Metal Brake Parts Cleaner 2-4 seconds between the spark plug well and steel tool pilot. The steel tool pilot must be lifted up
approximately 1/2" to allow brake cleaner to flood the porcelain and pin.
