F 150 4WD V8-5.4L Flex Fuel (2008)
2. NOTE: Slight turning of the clockspring rotor is allowable for alignment purposes to the steering column.
With the flats of the clockspring aligned to the flats of the steering column, slide the clockspring onto the steering column.
-
For vehicles receiving a new clockspring, remove the retaining pin.
-
For vehicles reusing the clockspring that was removed, remove the tape.
3. Connect the clockspring electrical connectors.
-
Make sure to align and completely seat the electrical connectors.
4. Install the multi-function switch and screw.
5. Install the upper steering column shroud and shroud screw.
6. Install the lower steering column shroud and screw.
7. Install the steering wheel.
8. Install the driver air bag module.
9. Repower the SRS.
