F 150 4WD V8-5.4L Flex Fuel (2008)
Part 2
Removal and Installation
1. CAUTION: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the
power steering components may result.
With the vehicle in NEUTRAL, position it on a hoist.
2. Using a suitable suction device, remove the power steering fluid from the fluid reservoir.
3. Remove the steering line clamp plate bolt, rotate the clamp plate and disconnect the return line.
^
To install, tighten to 23 Nm (17 lb-ft).
4. Release the clamp, disconnect the return hose from the power steering fluid cooler and remove the return line.
5. To install, reverse the removal procedure.
^
Fill the power steering system.
