F 150 4WD V8-5.4L Flex Fuel (2008)
Vehicles with 5.4L engine
1. Remove the air cleaner intake pipe.
Vehicles with 4.6L engine
2. Remove the cooling fan and shroud.
Vehicles with 4.2L engine
3. Remove the air cleaner outlet pipe.
All vehicles
4. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the power steering pump pulley.
5. Using the special tool, remove the power steering pump pulley.
Installation
All vehicles
1. NOTE: Make sure the pulley is flush with the end of the power steering pump shaft.
Using the special tool, install the power steering pump pulley.
2. Rotate the accessory drive belt tensioner and install the accessory drive belt on the power steering pump pulley.
Vehicles with 4.2L engine
3. Install the air cleaner outlet pipe.
Vehicles with 4.6L engine
4. Install the cooling fan and shroud.
Vehicles with 5.4L engine
5. Install the air cleaner intake pipe.
