F 150 4WD V8-5.4L Flex Fuel (2008)
Installation
1. Install the BSIA.
1
Install the BSIA and install the 2 screws.
2
Install the bulb into the housing.
3
Install a new tie strap on the wire harness.
2. Connect the electrical connector.
1
Connect the overdrive cancel button electrical connector.
2
Install a new tie strap to the wire harness.
3. Position the selector lever assembly in the console and install the bolts.
^
Tighten to 12 Nm (9 lb-ft).
