F 150 4WD V8-5.4L Flex Fuel (2008)
3. Remove the bolts and the skid plate (four wheel drive [4WD] vehicles).
4. Remove the fasteners and position the air deflector aside.
5. Disconnect the transmission fluid cooler tubes from the transmission case.
6. Remove the secondary latches from the transmission fluid cooler tubes.
7. Remove the transmission fluid cooler tubes from the bracket.
8. Remove the transmission fluid cooler tubes from the retainer.
9. Using the special tool, disconnect the transmission fluid cooler tubes from the radiator, and if equipped, the transmission fluid cooler.
Installation
1. Install the transmission fluid cooler tube(s).
^
Tighten to 27 Nm (20 lb-ft).
